Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Escondido
A gate that won’t open or won’t stay closed isn’t something you can put off in Escondido. Whether your wood driveway gate is dragging across the concrete or an iron gate has pulled away from its hinges, we can usually have a technician there same day or next morning. Cambridge Gate Repair is a gate-only shop, and we know exactly what inland valley heat does to gate hardware in the 92025, 92026, 92027, and 92029 ZIP codes. Call (833) 589-8195 and we’ll tell you what’s probably wrong before we even arrive.
Why Cambridge Gate Repair Is Escondido’s Preferred Gate Repair Company
Noel Carrera leads a team that works on gates all day, every day. We’re not a handyman service that occasionally gets a gate call. Escondido homeowners tell us the difference shows up in how fast we find the real problem: a gate that drags usually isn’t the panel, it’s the hinge post that’s dried out and shifted in two decades of valley sun. We see that pattern constantly in the tract-home neighborhoods east of Centre City and up in the hills around Hidden Meadows. When you call for Gate Repair, you get a technician who has seen your exact problem on other Escondido driveways this week, not someone learning on your gate.
Our technicians train on nine major gate and operator brands, including LiftMaster, FAAC, Mighty Mule, and Elite. That matters because Escondido has a wide mix of gates: 1970s ranch-style wood swing gates off Valley Parkway, ornamental iron gates in the custom homes around Lake Wohlford, and newer aluminum slide gates in the subdivisions near San Pasqual. We repair what’s installed. We don’t push a replacement unless the gate is past saving, and we can diagnose a LiftMaster operator or a FAAC control board without making you wait for a brand dealer.
Styles & brands we work with
Iron Gate Repair in Escondido
Iron Gate Repair in Escondido usually means one of two things: the gate has pulled away from its hinges or a weld has cracked. In a 100°F August afternoon, iron gates expand enough that hardware loosens, and after years of that cycle, hinge bolts back out and sections separate. We see it most often on ornamental driveway gates in older custom neighborhoods like the ones off El Norte Parkway and around Kit Carson Park, where gates have been in place since the 1980s and 1990s. Most iron gate repair in Escondido runs $225 – $480, depending on whether we’re resetting hinges, re-welding a cracked joint, or replacing a rack on a slide gate.
Hinge and post resets
An iron gate that scrapes the driveway or won’t close square has usually pulled its hinge bolts loose from a sun-baked post. We pull the gate, reset the hinge hardware, and often install longer bolts or sleeve anchors so it holds. If the post itself has shifted, we reset the footing before re-hanging.
Crack and weld repair
Escondido’s temperature swings stress weld points at gate corners and where pickets meet the frame. A cracked weld lets the gate rack, which then overloads the opener. We grind, re-weld, and repaint the repair area so the gate is square again and the opener isn’t fighting a twisting frame. Call (833) 589-8195 for a price on your iron gate.
Sliding Gate Repair in Escondido
Sliding Gate Repair in Escondido is the call we get when a swing gate just won’t work on the property. Plenty of Escondido driveways are tight, up against a slope or a shared fence line, and a swing gate would block the sidewalk or the neighbor’s access. That’s when a slide gate makes sense. But slide gates carry their own failure points: the steel wheels wear, the track fills with decomposed granite and leaves, and the rack-and-pinion drifts out of alignment. Most slide gate repair in Escondido lands between $275 – $550, with track cleaning and wheel replacement at the lower end and rack realignment or motor work higher.
Track and wheel service
Escondido wind pushes dirt and dry leaves into slide gate tracks, especially on properties near Reidy Creek or along the eastern edge of the valley. Worn wheels then bind on the debris, and the motor strains or trips its limit switch. We pull the gate, clean the track, replace worn wheels, and set the gate back square.
Rack and motor alignment
When a slide gate starts jerking or making a grinding sound, the rack has usually pulled away from the gear on the opener. We realign the rack, check the motor torque, and adjust the limit settings. If you have a LiftMaster or FAAC slide operator, we can dial in the settings without sending you to a dealer. For a same-week appointment near Escondido, call (833) 589-8195.
Trusted Brands We Service in Escondido
We opened as a brand-neutral shop on purpose. Escondido gates run on LiftMaster, FAAC, Elite, and Mighty Mule openers, and half our repair calls are on equipment the original installer no longer services. We stock boards, sensors, and limit switches for all of them. On a 1970s ranch property off Valley Center Road in Escondido, a wood driveway swing gate had sagged so badly the latch missed the striker plate by an inch. Our tech traced it to a rotted, sun-dried hinge post and reset the post footing before correcting the sag, so the panel and post were both fixed in one visit. We swapped the failing hardware, squared the gate, and adjusted a LiftMaster operator and its safety photocell so the homeowner’s daily vehicle access never stalled during the work. That’s the job done right: diagnosed and fixed, not just replaced.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Escondido Homes
- Sagging wood gates from dry, split hinge posts. The inland valley heat pulls moisture out of wood posts year after year. By the 20 to 30 year mark, the post itself has shifted or rotted at the base, and the gate drags even when the panel looks fine.
- Latches that stop catching after the first fall Santa Ana wind. Months of 90 to 100 degree days shrink wood and loosen metal hardware. The first dry, hot wind event in October or November pushes everything just past the point where the latch still catches. It’s predictable, and we make dozens of these calls every fall in Escondido.
- Iron gates that expanded and loosened in the heat. Long runs of iron fence and gate heat up unevenly. Hinge bolts back out, posts lean, and the gate scrapes or binds. It looks like a bent gate, but usually it’s just loosened hardware and a hinge reset.
- Slide gates grinding or jumping the track. Dry wind and dirt load the track, and the gate binds. In tight shared driveways where a swing gate won’t fit, a slide gate that jumps its track means the whole property is stuck. We realign the rack and pinion, set the loop detector back to the right spot, and get it rolling again.
Pricing for Gate Repair in Escondido, CA
Gate repair in Escondido runs from about $185 for a simple latch adjustment to $550 – $900 for a full hinge post reset or slide gate track rebuild. A typical iron gate hinge reset lands at $225 – $380. Wood gate post resets run $300 – $600 depending on whether the post needs a new footing. Slide gate repairs usually fall between $275 – $550. Every quote is a fixed number you approve before any work starts. We don’t hand you an open-ended time-and-materials bill and hope for the best. Call (833) 589-8195 for a free estimate, and we’ll give you the exact price over the phone if we can diagnose it from what you describe.
We Also Serve Cities Near Escondido
Beyond our Gate Repair in Escondido coverage, we take calls from San Pasqual, San Marcos, Lake San Marcos, and Rancho Santa Fe. Same-day service depends on the day’s route, but most of those areas are a 15 to 25 minute drive for our techs. If your gate is in San Marcos or Rancho Santa Fe and you need it working this week, call (833) 589-8195 and we’ll get you on the schedule.
Serving Escondido, CA — Our Local Coverage Area
We’re based in the Escondido area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Escondido
The dry Santa Ana wind event each fall is when months of accumulated heat damage finally shows itself. Wood posts and panels have been shrinking since June, metal hardware has been expanding and contracting daily, and the first hot, dry wind pushes everything just past its tolerance. The latch misses by a fraction of an inch, or the gate hangs low enough to scrape. It’s the single most common Escondido gate complaint we hear in October and November. A hinge reset and latch adjustment usually fixes it. Call (833) 589-8195 and we’ll tell you if it’s a simple adjustment.
Yes. Many Escondido driveways, especially in the older tract neighborhoods and on shared rights of way, don’t have the clearance for a swing gate. A slide gate that runs parallel to the fence line usually fits where a swing gate won’t. We measure the opening, check the available side room and foundation, and quote a slide gate that matches your existing fence. If the ground slopes or the driveway is tight against a wall, we adjust the track height and set the loop detector where vehicles actually stop, not where a generic installer would put it.
Usually the post. In a 1970s Escondido ranch home, the gate post was set 40 or 50 years ago, and a wood post buried in soil with decades of summer heat will rot or shift long before the gate panel fails. We check the post first: if it moves when we push on it, the post is the problem and resetting it fixes the sag. If the post is solid, we square the panel and replace the hinges. Either way, the fix is usually a single visit. Call (833) 589-8195 and describe what you’re seeing; we’ll tell you what’s likely wrong.
Yes. In California, automatic gates are required to have reversing sensors or photoelectric eyes, and they fail more often in Escondido’s heat and dust than people expect. If your gate reverses for no reason, won’t close, or beeps constantly, the sensors are usually dirty, misaligned, or sun-baked. We clean, realign, or replace them and test the gate’s reversal function before we leave. It’s not an upsell; it’s the law and it keeps your gate from closing on a car or a person.
Yes. Iron gates expand in our summer temperatures and the hardware loosens over time. Hinges back out, the gate twists, and it starts scraping or binding. We reset the hinges, re-square the gate, and tighten or replace the hardware so the gate doesn’t work itself loose again in the next heat cycle. If a weld cracked from the movement, we re-weld it. The work usually takes a few hours and runs $225 – $480. For an exact quote, call (833) 589-8195.
Need a gate fixed in Escondido today? Call Cambridge Gate Repair at (833) 589-8195. Noel Carrera and the team diagnose over the phone when we can, and we give you the exact price before any work starts.
Written by Noel Carrera, Owner at Cambridge Gate Repair, serving Escondido and North County San Diego.