Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in San Diego?
Gate parts and welding in San Diego typically run $95 to $450 for most parts-only repairs, while welded repairs (hinges, frames, posts, and gate reinforcement) usually land between $175 and $650 depending on the metal, the damage, and whether the gate is on-site. A full gate rebuild or heavy fabrication job can reach $900 to $2,400 or more. We quote per gate because a sagging vinyl gate and a welded steel security gate have almost nothing in common in labor.
Here’s the short version: parts are usually the smaller line on the invoice. The welding, cutting, finish work, and re-hanging is where the cost concentrates. Call us at (833) 589-8195 and we’ll give you a free estimate on your specific gate. We’re a gate specialist, not a generalist, so we diagnose what’s actually failing before recommending any parts.
Key Takeaways
- Most San Diego gate parts repairs fall between $95 and $450; welded repairs between $175 and $650.
- Coastal salt air in neighborhoods like Ocean Beach and Pacific Beach accelerates rust and hinge wear, which drives up welding frequency.
- Brand-agnostic parts sourcing (LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule) means we fix the gate you have rather than defaulting to replacement.
- Motor and control board components cost more than mechanical parts, but they’re still usually cheaper to replace than to swap the whole operator.
- Free estimates, upfront pricing, and a gate-only trade focus keep you from paying for guesswork.
Gate Parts & Welding Cost Breakdown (2026)
Below are the ranges we see across residential and commercial gates in San Diego this year. These are parts-and-labor estimates for common jobs; complex fabrication or custom-fit brackets move toward the top of each range. For a fuller look at what we cover, see our Gate Parts & Welding in San Diego service page.
| Job / Part | Typical 2026 San Diego Range |
|---|---|
| Hinge replacement (weld-on or bolt-on, per hinge) | $120 – $280 |
| Gate frame or post welding repair | $175 – $450 |
| Latch and striker replacement | $95 – $220 |
| Roller and track part replacement (sliding gate) | $140 – $320 |
| Gate operator motor replacement (residential) | $450 – $950 |
| Control board replacement | $280 – $620 |
| Safety sensor / photo-eye pair | $150 – $340 |
| Loop detector repair or replacement | $300 – $700 |
| Gate sag correction (re-hang + weld) | $250 – $600 |
| Full gate rebuild / heavy fabrication | $900 – $2,400+ |
What pushes a quote up: rust-through on coastal gates that requires cutting out and replacing metal rather than welding over it, powder-coat or paint finish work, and commercial gates that need heavier stock and longer weld time. What pulls it down: parts-only jobs where the gate doesn’t need to come off its hinges, standard bolt-on hardware that doesn’t require fabrication, and diagnosing a control board issue before it takes the motor with it. We work on the gate you have across nine operator brands, so we’re not steering you toward a replacement because that’s the only brand we stock.
What Affects Gate Parts & Welding Pricing in San Diego
- Coastal salt air and rust. If your gate is within a few miles of the water (Ocean Beach, Mission Beach, Pacific Beach, La Jolla), salt fog eats through welds and hinges faster than anywhere inland. We regularly see gates in these neighborhoods fail at the hinge weld years before the same gate would in Carmel Valley or Scripps Ranch.
- Gate material and gauge. Aluminum, steel, wrought iron, and vinyl each weld differently. Thin-gauge aluminum needs more care (and sometimes reinforcement plate) than heavier steel, which affects labor time.
- Manual vs. electric gate. A manual swing gate’s parts job is largely mechanical. Once an operator is involved, you’re also paying for diagnostics on motors, control boards, and sensors, and that work carries a higher labor rate.
- Operator brand and part availability. LiftMaster and Linear parts are widely available and generally cheaper. FAAC, BFT, and DoorKing commercial parts can cost more and sometimes take longer to source, which affects the total.
- Access and site conditions. A gate you can reach with a truck and a welder is cheaper to work on than one down a narrow driveway or behind landscaping. Commercial properties with security access controls add time.
- Whether it’s repair or replace. Welding a hinge is usually far cheaper than replacing a gate section. We diagnose and fix first; replacement is the last option, not the first quote.
How to Save on Gate Parts & Welding
The biggest savings come from catching problems early. A hinge that’s starting to crack is a $150 weld; a hinge that’s torn out of the frame is a $400 fabrication job. Same gate, very different invoice. If your gate is dragging, sagging, or making noise, get it looked at before the metal fatigues further.
- Fix the small weld before it becomes a frame repair. Catching a hairline crack early keeps the job in the lower range.
- Keep coastal gates coated. Touching up paint or rust inhibitor on welds and hinges in beach neighborhoods slows corrosion and stretches the time between repairs.
- Service the operator, not just the gate. A control board that’s failing can damage the motor if ignored. Early diagnosis on electric gates usually saves money compared to a full motor replacement.
- Ask for a per-gate quote, not a per-hour guess. We price the job so you know what you’re paying before we start, which is one reason to start with a home visit.
- Get a free estimate. Call (833) 589-8195 and we’ll give you a straight number before any work begins.
FAQs – Gate Parts & Welding Cost
How much does gate welding cost in San Diego?
Most gate welding repairs in San Diego cost $175 to $450, with frame repairs and heavy fabrication reaching $650 or more. The price depends on the metal type, how much rust has to be cut out, and whether the gate needs to be removed to weld properly. Call (833) 589-8195 for an exact quote on your gate; estimates are free.
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper than replacement. A welded hinge or frame repair in the $175 to $450 range versus $900 to $2,400+ for a rebuild means fixing usually wins unless the gate’s core structure is compromised. We diagnose first and only recommend replacement when the metal itself is beyond saving. Call (833) 589-8195 and we’ll tell you which side of that line your gate is on.
How much does an electric gate motor or control board cost to replace in San Diego?
Residential gate operator motors run $450 to $950 installed, and control board replacements run $280 to $620. Loop detectors and safety sensors add $150 to $700 depending on the system. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we can repair the operator you have rather than forcing a new one. Call (833) 589-8195 for a free estimate.
Can you come today for a broken gate?
Often, yes. We prioritize gates that are stuck open, sagging dangerously, or leaving a property unsecured. Same-day availability depends on the day, so the fastest path is a call to (833) 589-8195. We’ll tell you honestly when we can be out and what it’ll cost before we start.
Do you charge for estimates?
No. Estimates are free. We look at the gate, diagnose the parts or welding issue, and give you a straight price with no pressure to replace anything you don’t need to. Call (833) 589-8195 to schedule.
If your gate is sagging, cracked, or running on a failing operator, the earlier we look at it, the less it tends to cost. We work on the gate you have, whether it’s a LiftMaster operator or a FAAC control board, manual or electric, residential or commercial. Call Cambridge Gate Repair at (833) 589-8195 for a free estimate and a straight answer on what your repair should cost in San Diego.
Pricing reflects the San Diego market as of 2026. Cambridge Gate Repair offers free estimates – call (833) 589-8195.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
— Kevin Nguyen"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Veronica Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Whitney Hoffman