Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Diego, CA
Gate installation in San Diego runs about $1,600 to $9,200 for a new driveway gate with a standard operator, and the work looks different depending on whether your home sits in a 1920s Craftsman bungalow in North Park or a coastal condo in Pacific Beach. We’re Cambridge Gate Repair, and gates are the only thing we do. Call (833) 589-8195 for a free estimate on any gate job in San Diego, from a fresh automatic gate install to a rust-seized hinge.
Why San Diego Homes Are Different
San Diego’s gate problems split along two lines most cities never deal with. Along the coastal strip from Ocean Beach up through La Jolla, marine salt air corrodes wrought-iron and steel hardware within a few years. We see white-crusted, frozen hinges and rusted operator arms on gates that would last decades in Poway. Just a few miles inland, the failure mode flips: dry canyon air in Mission Trails and San Carlos shrinks and swells wood gates, while settling canyon-soil shifts posts out of alignment. In North Park, South Park, Normal Heights, and Golden Hill, vintage Craftsman and Spanish Colonial homes often have narrow, sloping driveway aprons and original masonry pillars that were never engineered to carry a modern heavy swing or sliding gate. That means a San Diego installation frequently starts with pillar reinforcement or post replacement before the gate itself goes in, a step newer tract homes in Clairemont or Tierrasanta rarely need.
Styles & brands we work with
Our Main San Diego Services
Most San Diego homeowners and property managers call us for one of two reasons: a gate that won’t open or close, or a gate they’re ready to replace. Here’s how each works in this city.
Gate Repair in San Diego
San Diego’s mix of salt air and canyon soil means the gate you have is usually repairable with the right diagnosis. A sagging driveway gate in Clairemont is likely a worn hinge pin, not a sign the whole gate needs to go. In coastal neighborhoods, seized rollers and frozen latches come standard after a few wet winters. We rebuild hinges, straighten or replace posts, replace wood that’s rotted or split, and re-align tracks on sliding gates. Whether it’s a hand-forged iron gate in Mission Hills or a lightweight aluminum gate on a La Jolla hillside, we fix what’s there. See our full repair coverage at Gate Repair in San Diego.
Electric Gate Repair in San Diego
Electric gate failures in San Diego usually trace to a control board, a loop detector, a dead motor, or a safety sensor that’s been knocked out of alignment. Coastal salt spray accelerates corrosion inside operator housings across Ocean Beach and Pacific Beach, so we see cooked circuit boards and corroded limit switches more than in any inland ZIP code. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we diagnose what you have rather than pushing a whole new system. For the full scope, read Electric Gate Repair in San Diego.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in San Diego
New gate installation in San Diego means matching the gate design and weight to a specific house, a specific slope, and a specific microclimate. On a sloping North Park driveway, that’s a lighter aluminum gate with a swing operator sized for the gradient. On a bluff-top La Jolla property, it’s a rust-resistant gate that won’t corrode in constant marine moisture. We install every configuration: swing and sliding gates, manual and automated, wood and metal. For more on the full service, see Gate Installation. Every install starts with a free site measure and a written price before any work begins.
Automatic Gate Installation
An automatic gate changes how you use your driveway: no more getting out in the rain or after dark. We mount the operator, wire the control board, set travel limits, and program remotes and keypads before we leave.
Signs you need it
You have a gate that takes real effort to open, or you’re adding a gate to a property that currently has none.
What it costs in San Diego
Automatic gate installation in San Diego typically runs $2,300 to $9,200 depending on gate length, operator type, and whether we’re adding access control.
How we do it
We mount the operator and brackets, run low-voltage power and control wiring, install safety photo eyes, set open and close limits, and pair all remotes and keypads.
Driveway Gate Installation
A driveway gate sized for San Diego’s typically compact front yards needs careful measurement: too heavy a gate on a short setback makes a steep swing arc that scrapes or binds. We size the gate, posts, and hinges for the actual driveway slope and opening width.
Signs you need it
Your existing gate sags, scrapes, won’t close, or you’re fencing a driveway for the first time and want a gate that fits the opening right.
What it costs in San Diego
Driveway gate installation in San Diego typically runs $1,600 to $6,800 depending on material, width, and automation.
How we do it
We measure the opening, set and square the posts, hang the gate with rated hinges, install the latch or operator, and adjust the swing or slide until it moves clean.
Sliding Gate Installation
On narrow San Diego lots where a swing gate would arc across the whole driveway, a sliding gate saves the space. We install the rail, rollers, anti-derailment stops, and the motor that carries the gate along the track.
Signs you need it
Your driveway slopes or is too short for a swing arc, or you want to secure a commercial or multi-car opening without losing parking room.
What it costs in San Diego
Sliding gate installation in San Diego typically runs $2,500 to $8,400 depending on track length, gate weight, and operator.
How we do it
We lay the track level and parallel, mount the rollers and gate frame, hang the gate, set the operator, and tune the limit switches and safety edges.
What Gate Installation Costs in San Diego
| Item | Typical range in San Diego |
|---|---|
| Basic driveway gate (manual, aluminum) | $1,600 – $3,500 |
| Automatic gate with one operator | $2,300 – $6,500 |
| Sliding gate with track and motor | $2,500 – $9,200 |
Prices rise with gate length, masonry pillar reinforcement, long conduit runs from the house panel to the gate, and any access-control add-ons like a keypad or phone-entry system. Every quote is written, itemized, and agreed to before we start.
Do you handle the power run and safety sensors on a new gate in San Diego?
Yes. We run the low-voltage control wiring and power supply, mount the photo-eye safety sensors in the correct position for the gate’s arc, and set the force and speed limits so the gate reverses on contact. Call (833) 589-8195 for a quote on a full installation.
How long does gate installation take in San Diego?
Most driveways run one to two days from post-setting to final tuning, depending on pillar condition and operator wiring. Coastal or steep-lot jobs can add a half-day if we’re reinforcing old masonry pillars first. We’ll give you a written timeline with the quote.
Brands We Service in San Diego
We’re factory-agnostic, so we service and install the gate system you already have or the one that fits your job best. Our San Diego trucks carry common parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most common part replacements happen in one visit. See our brands for the full breakdown.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Diego, CA
| Service | Typical range in San Diego |
|---|---|
| Hinge or latch repair | $120 – $350 |
| Post replacement or reinforcement | $300 – $900 |
| Wood gate repair (sagging or rot) | $200 – $600 |
| Track and roller replacement (sliding gate) | $250 – $750 |
| Electric gate troubleshooting | $85 – $180 |
| Control board replacement | $300 – $800 |
| Motor or operator replacement | $500 – $1,600 |
| Basic driveway gate (manual, aluminum) | $1,600 – $3,500 |
| Automatic gate with one operator | $2,300 – $6,500 |
| Sliding gate with track and motor | $2,500 – $9,200 |
Salt-corrosion repairs on coastal properties and steep-driveway installations in canyon neighborhoods push San Diego prices toward the upper end of those ranges. The price you’re quoted before we start is the price you pay: no work begins until we’ve agreed on the number in writing.
Neighborhoods We Serve in San Diego
We cover the full city of San Diego, from the coastal strip through the inland canyon neighborhoods and up to the North County line. We know the gate stock in each area, because we work on it every week.
- North Park and South Park – vintage bungalows with original masonry pillars
- Ocean Beach and Pacific Beach – salt-corroded iron and operator failures
- La Jolla – hillside lots, modern aluminum gates, constant marine moisture
- Clairemont and Tierrasanta – mid-century tract homes with standard driveway gates
- Golden Hill and Normal Heights – narrow driveways with limited swing space
We typically reach any San Diego address within a day for non-emergency calls, and we run same-day service for gate repairs where parts are on the truck.
Service Area – Cities Near San Diego
Beyond San Diego proper, our crews cover the surrounding county from East County through the coastal cities. We work regularly in La Mesa, CA, Lemon Grove, CA, Coronado, CA, and Sorrento Valley, CA, and we’re the gate specialist for each.
Serving San Diego, CA — Our Local Coverage Area
We’re based in the San Diego area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Diego
Most residential driveway gates in San Diego don’t require a city building permit as long as they meet setback and height rules, but some HOAs and coastal-zone overlays add their own review. We’ll tell you if your specific property triggers anything before you commit, so the install doesn’t get held up.
For gate failures we can usually reach any San Diego address the same day if we have the part on the truck, which covers most common hinge, roller, and operator problems. For new installations, we schedule a free site measure and give you a written timeline on the spot. Call (833) 589-8195 and we’ll tell you what’s realistic for your neighborhood.
Yes. We work with San Diego HOAs and property managers on both single-family gates and shared community entrances, and we’re set up for commercial and multi-family access systems. We’ll coordinate the diagnostics and quote through your property manager so the board gets a clear itemized proposal.
If your gate is sticking, sagging, dead, or you’re ready to put in a new one, call Cambridge Gate Repair at (833) 589-8195. We’re the San Diego gate specialist, and the estimate is free.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Diego Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Veronica Martinez"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Whitney Hoffman"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Allison Miller